Description

2PC T Rope Hook – Deluxe Chrome/Black (Set of 2)

What it is

• A pair of metal T‑shaped rope hooks (also called tie‑down cleats) used as anchor points for rope, cords, or bungee straps.

Key features

• Finish: Deluxe chrome/black for a clean look and basic corrosion resistance.
• Construction: Solid metal hooks with smooth, rounded edges to reduce rope wear.
• Mounting: Each hook has two pre‑drilled holes for screw mounting on wood or metal surfaces.
• Packaging: Blister pack with 2 hooks (there appears to be a small bag of hardware inside; confirm at purchase).

Common uses

• Creating tie‑down points on truck/van beds, trailers, or utility carts.
• Securing lines on small boats, docks, or storage boxes.
• Organizing and hanging items in garages/sheds (ropes, hoses, extension cords).
• Fastening tarps, cargo nets, or light gear.

Installation tips

• Position on a sturdy surface; mark and pre‑drill pilot holes.
• Use appropriate screws/bolts and, if outdoors, add sealant or anti‑rust protection.
• Space multiple hooks as needed for even load distribution.

Notes

• Load capacity isn’t listed on the packaging—treat as light/medium duty.
• Not for lifting people, climbing, or heavy overhead loads.
  • What are you mounting to? (wood stud wall, plywood, truck/trailer sheet metal, boat/dock, concrete)
  • How much weight per hook? (<25 lb, 25–75 lb, 75–150 lb)
  • Indoors, outdoors, or marine/salty environment?
  • What are you securing (tarps, tools, cargo, rope size)?

  Quick default recommendations (if you just need a safe starting point):

  • Wood wall/studs (garage/shed)
    • Screws: #10 x 1.5 in stainless pan-head (or #12 for heavier).
    • Pilot hole: 1/8 in (3 mm) softwood, 9/64 in (3.5 mm) hardwood.
    • Mount into studs; spacing 16–24 in apart depending on what you hang.
  • Truck bed or trailer sheet metal
    • Hardware: M6 x 20–25 mm stainless bolts with large washers + nyloc nuts (through-bolt if you can access the back).
    • If you must use screws: #12 self-drilling TEK, but bolts are stronger.
    • Seal holes with rust inhibitor; space hooks 12–18 in along rails/corners.
  • Plywood trailer deck
    • Through-bolt M6 with fender washers top/bottom; place near frame crossmembers.
    • Spacing 12–24 in depending on cargo.
  • Boat/dock (marine)
    • 316 stainless M6 through-bolts + backing plate; use marine sealant (e.g., 4200).
    • Spacing 12–18 in.
  • Concrete/masonry
    • Anchors: 1/4 in sleeve anchors or Tapcon concrete screws.
    • Drill with hammer drill to the anchor’s spec; space 12–18 in.

  General tips

  • Keep at least 1.5 in from edges; orient the “T” so the pull is inline with the mounting screws.
  • Without a listed rating, treat as light/medium duty; not for overhead lifting or life safety.
  • These hooks work best with 6–10 mm (1/4–3/8 in) rope or light straps.